Materials Science and Engineering


MSE: Introduction

Faculty Affiliation

Applied Science and Engineering

Degree Programs

Materials Science and Engineering

MASc

  • Emphasis:
    • Sustainable Energy

MEng

  • Emphases:
    • Advanced Manufacturing;
    • Advanced Soft Materials;
    • Advanced Water Technologies;
    • Biomanufacturing;
    • Data Analytics and Machine Learning;
    • Engineering and Globalization;
    • Entrepreneurship, Leadership, Innovation and Technology in Engineering (ELITE);
    • Forensic Engineering;
    • Sustainable Energy

PhD

  • Emphasis:
    • Sustainable Energy

Collaborative Specializations

The following collaborative specialization is available to students in participating degree programs as listed below:

Overview

Climate change, energy availability, and resource depletion are today’s global challenges. The Department of Materials Science and Engineering (MSE) is at the forefront of addressing these issues. MSE's research, education, and applications expertise in advanced materials engineering enables the development of new and sustainable technologies, creating innovative solutions for the global environment. As a world leader in materials applications and processing, the department's commitment to excellence fosters innovative thinking in its students, leading to the development of brilliant minds and ideas that make a global impact.

MSE research and studies address the general problem of understanding structure-property-processing-performance relationships in materials. Materials science subjects focus on the structure, properties, and application of advanced materials in areas such as: Advanced Manufacturing & Coating Techniques; Adaptive Materials; Biomaterials & Biotechnology; Computational Materials Engineering; Electronic Materials & Systems; Materials Fracture & Failure; Nanomaterials & Nanotechnology; Optoelectronics; Photovoltaics; Process Metallurgy; Surface Engineering; and Sustainable Mineral & Materials Processing.

Leading-edge research facilities house 11 electron microscopy and surface characterization instruments in the Ontario Centre for the Characterization of Advanced Materials (OCCAM) and five new analytical instruments in the Walter Curlook Materials Characterization & Processing Laboratory, where graduate students learn from world-renowned researchers.

Contact and Address

Web: mse.utoronto.ca
Email: mse.graduate@utoronto.ca
Telephone: (416) 978-3012
Fax: (416) 978-4155

Department of Materials Science and Engineering
University of Toronto
Wallberg Building
Room 140, 184 College Street
Toronto, Ontario M5S 3E4
Canada


MSE: Graduate Faculty

Full Members

Azimi, Gisele - BASc, MASc, PhD
Barati Sedeh, Mansoor - BSc, MASc, PhD
Coyle, Tom - BS, BA, ScD
Goh, M. Cynthia - PhD
Grynpas, Marc - MSc, PhD
Hatton, Benjamin - BASc, MASc, PhD (Associate Chair, Graduate Studies)
Hattrick-Simpers, Jason - BS, PhD
Hibbard, Glenn - BASc, PhD
Howe, Jane - PhD
Kherani, Nazir - BASc, MASc, PhD
Lu, Zheng-Hong - BSc, MSc, PhD
Matsuura, Naomi - ME, PhD
Naguib, Hani - BSc, ME, PhD, PEng (Chair and Graduate Chair)
Nogami, Jun - BASc, MASc, PhD
Perovic, Doug - BASc, MASc, PhD
Ramsay, Scott - BASc, MASc, PhD
Ruda, Harry - BSc, PhD
Singh, Chandra Veer - BASc, MTech, PhD (Associate Chair, Research)
Sone, Eli - BSc, MS, PhD
Thorpe, Steven - BASc, MASc, PhD
von Lilienfeld Toal, Anatole - PhD
Wang, Zhirui - BEng, BEng, MASc, PhD

Members Emeriti

Erb, Uwe - MSc, PhD
Lian, Keryn - BE, MASc, MSc, PhD
Mclean, Alexander - BSc, PhD
Pilliar, Robert - BASc, PhD
Sommerville, Iain - BSc, PhD, ARCS

Associate Members

Dai-Hattrick, Liyang - BS, MASc, PhD


MSE: Materials Science and Engineering MASc

The Master of Applied Science (MASc) program provides students with an opportunity to pursue advanced study and research with the guidance of experts in their respective fields. Studying in a chosen area of specialty and developing skills through hands-on experience in the MSE world-class labs provides students with the ability to either pursue PhD studies or to move out into industry with enriched skills and knowledge. This full-time program demands commitment and passion for research in materials engineering. For those interested in continuing to PhD-level research, successful completion of the MASc is the normal route.

Master of Applied Science

Minimum Admission Requirements

  • Students are admitted under the General Regulations of the School of Graduate Studies. Applicants must also satisfy the Department of Materials Science and Engineering's additional admission requirements stated below.

  • For students whose primary language is not English, the department requires a Test of English as a Foreign Language (TOEFL) with the following minimum scores:

    • Paper-based TOEFL: minimum score of 580 and 4 on the Test of Written English (TWE)

    • Internet-based TOEFL: minimum score of 93/120 and 22/30 on the writing and speaking sections.

Completion Requirements

  • Coursework. The program of study normally includes 2.0 full-course equivalents (FCEs) (four half courses), including:

    • MSE1000H, the mandatory weekly Graduate Research Seminar MASc

    • Three half courses (1.5 FCEs), one of which must be chosen from the list of MSE graduate course offerings.

  • JDE1000H Ethics in Research, a non-credit graduate ethics seminar.

  • The required thesis is based upon research work carried out in the department. The thesis must be presented at an oral examination.

  • Students have the option of completing an emphasis in Sustainable Energy as part of their degree program. Please see details in the Materials Science and Engineering MASc, MEng, PhD Emphases section.

Mode of Delivery: In person
Program Length: 6 sessions full-time (typical registration sequence: FWS-FWS)
Time Limit: 3 years full-time

 


MSE: Materials Science and Engineering MEng

The Master of Engineering (MEng) program has been developed for recent graduates who wish to pursue graduate-level studies but may not be interested in continuing to the PhD program. This program is also intended for working engineers who wish to augment their current knowledge and add to their credentials. The multidisciplinary nature of materials engineering and the coursework-only and coursework-plus-project options enable students to build personalized programs which best suit their individual interests and needs. The MSE MEng is recognized and respected by employers globally and can enhance and enrich the career opportunities of graduates.

The MEng program can be taken on a full-time, extended full-time, or part-time basis.

MEng Program (Full-Time and Part-Time Options)

Minimum Admission Requirements

  • Applicants are admitted under the General Regulations of the School of Graduate Studies. Applicants must also satisfy the Department of Materials Science and Engineering's additional admission requirements stated below.

  • For students whose primary language is not English, the department requires a Test of English as a Foreign Language (TOEFL) with the following minimum scores:

    • Paper-based TOEFL: minimum score of 580 and 4 on the Test of Written English (TWE)

    • Internet-based TOEFL: minimum score of 93/120 and 22/30 on the writing and speaking sections.

Completion Requirements

  • For students with adequate undergraduate preparation, the normal program will include 5.0 full-course equivalents (FCEs) (10 half courses). A project may be substituted for 1.5 FCEs (3 half courses). Students enrolled in this option work in consultation with a professor who acts as advisor for the project undertaken. An oral presentation of the project may be required.

  • Full-time students normally complete the requirements in three sessions (one year).

  • Part-time students normally complete the requirements in nine sessions (three years). The limit is four half courses per year and two half courses per session.

  • Full-time MEng students may transfer to the research-stream MASc program if they meet all of the following criteria:

    • The request to transfer must be submitted at the beginning of the second session of enrolment. For example, students enrolled in September must successfully complete 1.5 FCEs (three half courses), technical courses of which at least one must be from MSE, with a B+ or 78% average. The technical courses taken during the MEng program will be credited toward the MASc program.

    • Have a supervisor who is willing to provide funding for an MASc research project starting in the second session of enrolment.

  • Students have the option of completing an emphasis in Advanced Manufacturing; Advanced Soft Materials; Advanced Water Technologies; Biomanufacturing; Data Analytics and Machine Learning; Engineering and Globalization; Entrepreneurship, Leadership, Innovation and Technology in Engineering (ELITE); Forensic Engineering; or Sustainable Energy as part of their degree program. Please see details in the Materials Science and Engineering Emphases section.

Mode of Delivery: In person
Program Length: 3 sessions full-time (typical registration sequence: FWS); 9 sessions part-time
Time Limit: 3 years full-time; 6 years part-time

 

MEng Program (Extended Full-Time Option)

Minimum Admission Requirements

  • Applicants are admitted under the General Regulations of the School of Graduate Studies. Applicants must also satisfy the Department of Materials Science and Engineering's additional admission requirements stated below.

  • For students whose primary language is not English, the department requires a Test of English as a Foreign Language (TOEFL) with the following minimum scores:

    • Paper-based TOEFL: minimum score of 580 and 4 on the Test of Written English (TWE)

    • Internet-based TOEFL: minimum score of 93/120 and 22/30 on the writing and speaking sections.

Completion Requirements

  • For students with adequate undergraduate preparation, the normal program will include 5.0 full-course equivalents (FCEs) (10 half courses). A project may be substituted for 1.5 FCEs (3 half courses). Students enrolled in this option work in consultation with a professor who acts as advisor for the project undertaken. An oral presentation of the project may be required.

  • Students are expected to complete the requirements in six sessions (two years). The limit is six half courses per year and three half courses per session.

  • Full-time MEng students may transfer to the research-stream MASc program if they meet all of the following criteria:

    • The request to transfer must be submitted at the beginning of the second session of enrolment. For example, students enrolled in September must successfully complete 1.5 FCEs (three half courses), technical courses of which at least one must be from MSE, with a B+ or 78% average. The technical courses taken during the MEng program will be credited toward the MASc program.

    • Have a supervisor who is willing to provide funding for an MASc research project starting in the second session of enrolment.

  • Students have the option of completing an emphasis in Advanced Manufacturing; Advanced Soft Materials; Advanced Water Technologies; Biomanufacturing; Data Analytics and Machine Learning; Engineering and Globalization; Entrepreneurship, Leadership, Innovation and Technology in Engineering (ELITE); Forensic Engineering; or Sustainable Energy as part of their degree program. Please see details in the Materials Science and Engineering Emphases section.

Mode of Delivery: In person
Program Length: 6 sessions full-time (typical registration sequence: FWS-FWS)
Time Limit: 3 years full-time

 


MSE: Materials Science and Engineering PhD

Pursuing a Doctor of Philosophy (PhD) degree, the most advanced research degree in the Faculty of Applied Science and Engineering, can be a stepping stone to an academic career or to an industrial career which would benefit from in-depth applied research and research skills. Under the guidance of an accomplished supervisor, PhD students engage in original research that contributes to a variety of fields of study. Four years of PhD study allowing students to collaborate with local and international colleagues culminates in a written thesis which is presented orally and evaluated by experts. This is a degree program for outstanding students.

Applicants may enter the PhD program via one of three routes: 1) following successful completion of an MASc degree; 2) transfer from the University of Toronto MASc program to continue work that was begun at that level; or 3) direct entry following completion of an appropriate bachelor's degree.

The program can also be taken on a flexible-time basis.

PhD Program

Minimum Admission Requirements

  • Applicants are admitted under the General Regulations of the School of Graduate Studies. Applicants must also satisfy the Department of Materials Science and Engineering (MSE)'s additional admission requirements stated below.

  • Students are normally expected to have completed a master's-level program before entering the PhD program.

  • For students whose primary language is not English, the department requires a Test of English as a Foreign Language (TOEFL) with the following minimum scores:

    • Paper-based TOEFL: minimum score of 580 and 4 on the Test of Written English (TWE)

    • Internet-based TOEFL: minimum score of 93/120 and 22/30 on the writing and speaking sections.

Completion Requirements

  • The primary subject in a program will be extractive and process metallurgy, physical metallurgy, or materials science.

  • Coursework. The program of study normally includes 2.0 full-course equivalents (FCEs) (four half courses), including the weekly Graduate Research Seminar, and a thesis. The coursework selected normally includes:

    • MSE2000H Graduate Research Seminar PhD.

    • Three half courses (1.5 FCEs), at least one of which must be chosen from the list of MSE graduate course offerings.

    • The departmental seminar, comprising a minimum of two seminars presented to the academic staff and students of MSE.

  • Students must complete the seminar JDE1000H Ethics in Research, a non-credit course.

  • A general Qualifying Examination must be scheduled and taken within 12 months of initial registration. In case of failure, one further attempt within 3 months is allowed, no later than within 15 months of initial registration. No further attempts are permitted. In order to take this examination, students must complete all required coursework except for the Graduate Research Seminar PhD.

  • The Qualifying Examination consists of:

    • A report (25 to 30 pages) of research to date, in the form of a dossier.

    • A presentation (20 to 25 minutes) summarizing research, with particular emphasis on providing a critical assessment of the literature in the field, a central hypothesis of thesis, proposed methodology, and recent experimental progress.

    • An oral examination, immediately following the presentation, by the Qualifying Examination committee who will ask the candidate questions pertaining to either the presented material, or related questions in materials science. The student is expected to have a working-level knowledge of the fundamentals of materials science as it pertains to the proposed area of research, and on a broader basis, at the level of a second-year undergraduate student in Materials Science.

  • The required thesis is based upon research work carried out in the department in the areas of extractive and process metallurgy, physical metallurgy, or materials science.

  • Students have the option of completing an emphasis in Sustainable Energy as part of their degree program. Please see details in the Materials Science and Engineering MASc, MEng, PhD Emphases section.

Mode of Delivery: In person
Program Length: 4 years full-time (typical registration sequence: Continuous)
Time Limit: 6 years full-time

 

PhD Program (Transfer)

Transfer Requirements

  • Very strong MASc students may apply to transfer to the PhD program after completing one year of the MASc program. Regulations governing such transfers are available in the MSE Graduate Studies office.

Completion Requirements

  • The primary subject in a program will be extractive and process metallurgy, physical metallurgy, or materials science.

  • Coursework. The program of study normally includes 2.5 full-course equivalents (FCEs), including the weekly Graduate Research Seminar PhD, and a thesis. The coursework selected normally includes:

    • Three half courses (1.5 FCEs) from the MASc program.

    • MSE2000H Graduate Research Seminar PhD.

    • An additional 0.5 graduate FCE.

  • A general Qualifying Examination must be scheduled and taken within 12 months of initial registration. In case of failure, one further attempt within 3 months is allowed, no later than within 15 months of initial registration. No further attempts are permitted. In order to take this examination, students must complete all required coursework except for the Graduate Research Seminar PhD. The Qualifying Examination consists of:

    • A report (25 to 30 pages) of research to date, in the form of a dossier.

    • A presentation (20 to 25 minutes) summarizing research, with a particular emphasis on providing a critical assessment of the literature in the field, a central hypothesis of the thesis, proposed methodology, and recent experimental progress.

    • An oral examination, immediately following the presentation, by the Qualifying Examination committee who will ask the candidate questions pertaining to either the presented material, or related questions in materials science. The student is expected to have a working-level knowledge of the fundamentals of materials science as it pertains to the proposed area of research, and on a broader basis, at the level of a second-year undergraduate student in Materials Science.

  • The required thesis is based upon research work carried out in the department in the areas of extractive and process metallurgy, physical metallurgy, or materials science.

  • Students have the option of completing an emphasis in Sustainable Energy as part of their degree program. Please see details in the Materials Science and Engineering MASc, MEng, PhD Emphases section.

Mode of Delivery: In person
Program Length: 5 years full-time (typical registration sequence: Continuous)
Time Limit: 7 years full-time

 

PhD Program (Direct-Entry)

Minimum Admission Requirements

  • Applicants are admitted under the General Regulations of the School of Graduate Studies. Applicants must also satisfy the Department of Materials Science and Engineering (MSE)'s additional admission requirements stated below.

  • Exceptionally strong BASc students with an average grade of A– over the final four sessions of undergraduate studies (excluding Summer sessions in some cases) may be considered for direct entry to the PhD program.

  • For students whose primary language is not English, the department requires a Test of English as a Foreign Language (TOEFL) with the following minimum scores:

    • Paper-based TOEFL: minimum score of 580 and 4 on the Test of Written English (TWE)

    • Internet-based TOEFL: minimum score of 93/120 and 22/30 on the writing and speaking sections.

Completion Requirements

  • The primary subject in a program will be extractive and process metallurgy, physical metallurgy, or materials science.

  • Coursework. The program of study normally includes 3.0 full-course equivalents (FCEs) (six half courses), including the weekly Graduate Research Seminar PhD, and a thesis. The coursework selected normally includes:

    • MSE2000H Graduate Research Seminar PhD.

    • Five half courses (2.5 FCEs), at least two of which must be chosen from the list of MSE graduate course offerings.

  • Students must complete the seminar JDE1000H Ethics in Research, a non-credit course.

  • A general Qualifying Examination must be scheduled and taken within 12 months of initial registration. In case of failure, one further attempt within 3 months is allowed, no later than within 15 months of initial registration. No further attempts are permitted. In order to take this examination, students must complete all required coursework except for the Graduate Research Seminar PhD. The Qualifying Examination consists of:

    • A report (25 to 30 pages) of research to date, in the form of a dossier.

    • A presentation (20 to 25 minutes) summarizing research, with particular emphasis on providing a critical assessment of the literature in the field, a central hypothesis of thesis, proposed methodology, and recent experimental progress.

    • An oral examination, immediately following the presentation, by the Qualifying Examination committee who will ask the candidate questions pertaining to either the presented material, or related questions in materials science. The student is expected to have a working-level knowledge of the fundamentals of materials science as it pertains to the proposed area of research, and on a broader basis, at the level of a second-year undergraduate student in Materials Science.

  • The required thesis is based upon research work carried out in the department in the areas of extractive and process metallurgy, physical metallurgy, or materials science.

  • Students have the option of completing an emphasis in Sustainable Energy as part of their degree program. Please see details in the Materials Science and Engineering MASc, MEng, PhD Emphases section.

Mode of Delivery: In person
Program Length: 5 years full-time (typical registration sequence: Continuous)
Time Limit: 7 years full-time

 

PhD Program (Flexible-Time)

Minimum Admission Requirements

  • Applicants are admitted under the General Regulations of the School of Graduate Studies. Applicants must also satisfy the Department of Materials Science and Engineering (MSE)'s additional admission requirements stated below.

  • Students must have completed a master's-level program before entering the PhD program.

  • For students whose primary language is not English, the department requires a Test of English as a Foreign Language (TOEFL) with the following minimum scores:

    • Paper-based TOEFL: minimum score of 580 and 4 on the Test of Written English (TWE)

    • Internet-based TOEFL: minimum score of 93/120 and 22/30 on the writing and speaking sections.

  • Applicants to the flexible-time PhD option are accepted under the same admission requirements as applicants to the full-time PhD option.

Completion Requirements

  • The primary subject in a program will be extractive and process metallurgy, physical metallurgy, or materials science.

  • Students must complete 2.0 full-course equivalents (FCEs) (four half courses) as follows:

    • Year 1: 1.0 FCE plus the non-credit seminar JDE1000H Ethics in Research.

    • Year 2: 0.5 FCE. Prepare a research proposal and pass the Qualifying Examination.

    • Year 3: Present the first seminar for MSE2000H Graduate Research Seminar PhD.

    • Year 4: Research and writing.

    • Year 5: Research and writing. Present the second seminar for MSE2000H.

    • Year 6: Defend the thesis at the Doctoral Final Oral Examination by August 30.

  • Students in the flexible-time option are registered full-time during the first four years and part-time during subsequent years in the program.

  • The general Qualifying Examination must be scheduled and taken within 12 months of initial registration. In case of failure, one further attempt within 3 months is allowed, no later than within 15 months of initial registration. No further attempts are permitted. In order to take this examination, students must complete all required coursework except for the Graduate Research Seminar PhD. The Qualifying Examination consists of:

    • A report (25 to 30 pages) of research to date, in the form of a dossier.

    • A presentation (20 to 25 minutes) summarizing research, with particular emphasis on providing a critical assessment of the literature in the field, a central hypothesis of thesis, proposed methodology, and recent experimental progress.

    • An oral examination, immediately following the presentation, by the Qualifying Examination committee who will ask the candidate questions pertaining to either the presented material, or related questions in materials science. The student is expected to have a working-level knowledge of the fundamentals of materials science as it pertains to the proposed area of research, and on a broader basis, at the level of a second-year undergraduate student in Materials Science.

  • The required thesis is based upon research work carried out in the department in the areas of extractive and process metallurgy, physical metallurgy, or materials science.

  • Students have the option of completing an emphasis in Sustainable Energy as part of their degree program. Please see details in the Materials Science and Engineering MASc, MEng, PhD Emphases section.

Mode of Delivery: In person
Program Length: 6 years full-time (typical registration sequence: Continuous)
Time Limit: 8 years full-time

 


MSE: Materials Science and Engineering: Emphases

Advanced Manufacturing

Participating Programs:
  • Aerospace Science and Engineering MEng
  • Chemical Engineering and Applied Chemistry MEng
  • Mechanical and Industrial Engineering MEng
  • Materials Science and Engineering MEng

MEng students must successfully complete:

  • Four half courses (2.0 full-course equivalents [FCEs]), including at least one core course.

  • Elective courses may include other core courses, and courses from either of two streams: Manufacturing Engineering and Manufacturing Management.

Core Courses

AER501H1 Computational Structural Mechanics and Design Optimization,
AER1403H Advanced Aerospace Structures,
APS1028H Operations and Production Management for Manufacturing and Services,
CHE1123H Liquid Biofuels,
MIE519H1 Advanced Manufacturing Technologies,
MIE1740H Smart Materials and Structures.

Elective Courses — Manufacturing Engineering

AER1415H,
CHE1134H, CHE1475H,
MIE506H1, MIE540H1, MIE1706H, MIE1709H, MIE1718H, MIE1743H,
MSE1013H, MSE1015H, MSE1028H, MSE1031H, MSE1043H, MSE1058H, MSE1061H,
ROB501H1, ROB521H1.

Elective Courses — Manufacturing Management

APS1012H, APS1013H, APS1017H, APS1020H, APS1023H, APS1088H, APS1420H,
CHE561H1, CHE1434H,
MIE523H1, MIE1022H, MIE1505H, MIE1514H, MIE1715H, MIE1721H, MIE1727H,
TEP1011H, TEP1026H, TEP1501H.

 

Advanced Soft Materials

Participating Programs:
  • Chemical Engineering and Applied Chemistry MEng
  • Mechanical and Industrial Engineering MEng
  • Materials Science and Engineering MEng

MEng students must successfully complete any four half courses (2.0 full-course equivalents [FCEs]) from the following list:

CHE562H1, CHE1310H, CHE1333H, CHE1335H, CHE1475H,
JTC1134H, JTC1135H,
MIE1705H, MIE1706H, MIE1707H, MIE1740H,
MSE1043H.

Students may double-count one course at most towards any CHE emphasis, or towards any other emphasis in the Faculty.

 

Advanced Water Technologies

Participating Programs:
  • Chemical Engineering and Applied Chemistry MEng
  • Civil Engineering MEng
  • Materials Science and Engineering MEng

MEng students must successfully complete a total of 2.0 full-course equivalents (FCEs) (four half courses).

Core Courses

Students must select at least one of the following (0.5 FCE):

  • CHE1150H Industrial Water Technology

  • CIV1308H Physical and Chemical Treatment Processes

  • CIV1309H Biological Treatment Processes

  • CIV1311H Advanced and Sustainable Drinking Water Treatment

Students may select an additional course (0.5 FCE) from the list above, or they must select one (0.5 FCE) of the following:

  • CHE565H1 Aqueous Process Engineering

  • CIV541H1 Environmental Biotechnology

  • CIV550H1 Water Resources Engineering

  • CIV1303H Water Resources Systems Modeling

  • CIV1319H Chemistry and Analysis of Water and Wastes

  • CIV1330H Water, Sanitation, Hygiene, and Global Health

  • CIV1398H New Topics in Civil and Mineral Engineering

  • CME500H1 Fundamentals of Acid Rock Drainage

  • CME549H1 Groundwater Flow and Contamination.

Specialization Courses

Students must select the remaining balance of courses (1.0 FCE) from the following, or from any of the core courses listed above:

Enrolment and Completion

Students should contact Alison Morley (meng.civmin@utoronto.ca) to declare their interest, so that they can be notified of water engineering-related events and extracurricular activities.

To receive acknowledgment of the emphasis on their transcript, it is the student’s responsibility to declare completion of the emphasis to their home department’s graduate program administrator at the same time that they are requesting convocation. The student may also reach out to meng.civmin@utoronto.ca to confirm the completion of the emphasis.

 

Biomanufacturing

Participating Programs:
  • Chemical Engineering and Applied Chemistry MEng
  • Mechanical and Industrial Engineering MEng
  • Materials Science and Engineering MEng

MEng students must successfully complete any four half courses (2.0 full-course equivalents [FCEs]) from the following list:

CHE1123H, CHE1125H, CHE1134H, CHE1135H, CHE1334H, CHE1450H, CHE1471H,
JCC1313H,
JTC1331H,
BME1459H, BME1480H.

Students may double-count one course at most towards any CHE emphasis, or towards any other emphasis in the Faculty.

 

Data Analytics and Machine Learning

Participating Programs:
  • Chemical Engineering and Applied Chemistry MEng
  • Civil Engineering MEng
  • Electrical and Computer Engineering MEng
  • Mechanical and Industrial Engineering MEng
  • Materials Science and Engineering MEng

To be admitted to the emphasis in Data Analytics and Machine Learning, MEng students must first successfully complete a prerequisite course APS1070H (0.5 full-course equivalent [FCE]).

Subsequently, to earn the emphasis, students must successfully complete four additional half courses (2.0 FCEs) from the list of core courses or elective courses. These must include at least one core course; the remaining courses must be selected from the list of elective courses.

Students must have completed the prerequisite course APS1070H before taking any of the core courses.

Prerequisite Course

APS1070H Foundations of Data Analytics and Machine Learning.

Core Courses

CHE1147H Data Mining in Engineering,
ECE1513H Introduction to Machine Learning,
MIE1624H Introduction to Data Science and Analytics,
MIE1626H Data Science Methods and Statistical Learning,
MSE1065H Application of Artificial Intelligence in Materials Design.

Elective Courses

APS502H1, APS1005H, APS1017H, APS1022H, APS1050H, APS1051H, APS1052H, APS1053H, APS1080H,
BME1570H,
CEM1002H,
CHE507H1, CHE1108H, CHE1148H, CHE1434H,
CIV1504H, CIV1506H, CIV1507H, CIV1532H, CIV1538H, CIV1599H,
ECE537H1, ECE1504H, ECE1505H, ECE1657H, ECE1779H, ECE1786H,
MIE562H1, MIE1077H, MIE1413H, MIE1501H, MIE1512H, MIE1513H, MIE1517H, MIE1520H, MIE1620H, MIE1621H, MIE1622H, MIE1623H, MIE1625H, MIE1628H, MIE1653H, MIE1666H, MIE1721H, MIE1727H, MIE1769H,
MSE1063H.

 

Engineering and Globalization

Participating Programs:
  • Aerospace Science and Engineering MEng
  • Biomedical Engineering MEng
  • Chemical Engineering and Applied Chemistry MEng
  • Civil Engineering MEng
  • Electrical and Computer Engineering MEng
  • Mechanical and Industrial Engineering MEng
  • Materials Science and Engineering MEng

MEng students must successfully complete four half courses (2.0 full-course equivalents [FCEs]) from the following lists, with at least two half courses (or one full course) taken from Group A.

Group A

APS510H1, APS530H1, APS1420H, JCR1000Y (full-year course).

Group B

APS1015H, APS1020H, APS1024H, CHL5700H, CIV1399H.

Note: Students who choose to pursue an MEng project in their home department that aligns with the Centre for Global Engineering (CGEN)'s disciplinary focus, as deemed by the CGEN Director, may count the project as one required Group B course.

Students who complete the requirements of the emphasis in Engineering and Globalization and wish to obtain a notation on their transcript should contact the Faculty Graduate Studies office.

 

Entrepreneurship, Leadership, Innovation and Technology in Engineering

Participating Programs:
  • Aerospace Science and Engineering MEng
  • Biomedical Engineering MEng
  • Chemical Engineering and Applied Chemistry MEng
  • Civil Engineering MEng
  • Electrical and Computer Engineering MEng
  • Mechanical and Industrial Engineering MEng
  • Materials Science and Engineering MEng

MEng students must successfully complete any four of the following courses (2.0 full-course equivalents [FCEs]):

Leadership

TEP1010H, TEP1011H, TEP1026H, TEP1027H, TEP1029H, TEP1030H, TEP1501H, TEP1502H, TEP1601H.

Entrepreneurship and Innovation

APS511H1, APS1012H, APS1013H, APS1015H, APS1023H, APS1033H, APS1035H, APS1036H, APS1041H, APS1061H, APS1088H.

Finance and Management

AER1601H, APS500H1, APS502H1, APS1001H, APS1004H, APS1009H, APS1016H, APS1017H, APS1020H, APS1022H, APS1028H, APS1032H, APS1043H, APS1049H, APS1050H, APS1051H, APS1052H.

Engineering and Society

APS510H1, APS1018H, APS1024H, APS1025H, APS1031H, APS1034H, APS1090H, APS1101H, APS1420H.

 

Forensic Engineering

Participating Programs:
  • Biomedical Engineering MEng
  • Chemical Engineering and Applied Chemistry MEng
  • Civil Engineering MEng
  • Mechanical and Industrial Engineering MEng
  • Materials Science and Engineering MEng

MEng students must successfully complete four courses (one core course and three elective courses; 2.0 full-course equivalents [FCEs]).

Core Course

MSE1031H Forensic Engineering.

Elective Courses

AER1604H,
APS1034H, APS1039H, APS1040H, APS1101H,
BME1480H, BME1800H, BME1801H, BME1802H,
CHE561H1, CHE568H1, CHE1213H, CHE1431H, CHE1432H, CHE1434H, CHE1436H,
CIV510H1, CIV518H1, CIV1163H, CIV1171H, CIV1174H, CIV1190H, CIV1201H, CIV1279H, CIV1282H, CIV1422H, CIV1429H,
JMB1050H,
JNC2503H,
MIE507H1, MIE533H1, MIE566H1, MIE1301H, MIE1303H, MIE1411H, MIE1414H, MIE1514H, MIE1616H, MIE17108H, MIE1714H, MIE1721H, MIE1727H, MIE1804H,
MSE1015H, MSE1016H, MSE1022H, MSE1032H, MSE1067H.

 

Sustainable Energy

Participating Programs:
  • Aerospace Science and Engineering MASc
  • Aerospace Science and Engineering MEng
  • Aerospace Science and Engineering PhD
  • Chemical Engineering and Applied Chemistry MASc
  • Chemical Engineering and Applied Chemistry MEng
  • Chemical Engineering and Applied Chemistry PhD
  • Civil Engineering MASc
  • Civil Engineering MEng
  • Civil Engineering PhD
  • Electrical and Computer Engineering MASc
  • Electrical and Computer Engineering MEng
  • Electrical and Computer Engineering PhD
  • Mechanical and Industrial Engineering MASc
  • Mechanical and Industrial Engineering MEng
  • Mechanical and Industrial Engineering PhD
  • Materials Science and Engineering MASc
  • Materials Science and Engineering MEng
  • Materials Science and Engineering PhD

MASc and PhD students must successfully complete:

  • At least three half courses (1.5 full-course equivalents [FCEs]) from either of the following lists below.

  • A thesis towards their degree on a topic related to sustainable energy. Topics must be approved by the steering committee of the Institute of Sustainable Energy. Contact: emphasis@cpe.utoronto.ca.

MEng students must successfully complete:

  • Four half courses (2.0 FCEs) from either of the following lists below, including at least one core course (0.5 FCE).

Core Courses

APS1032H Introduction to Energy Project Management,
MIE515H1 Alternative Energy Systems,
MIE1120H Current Energy Infrastructure and Resources.

Elective Courses

AER507H1, AER1304H, AER1315H, AER1415H,
CHE568H1, CHE1053H, CHE1118H, CHE1123H, CHE1142H, CHE1143H,
CIV575H1, CIV576H1, CIV577H1, CIV1303H, CIV1307H,
ECE1030H, ECE1055H, ECE1057H, ECE1059H, ECE1085H, ECE1086H, ECE1092H, ECE1094H, ECE1476H,
MIE516H1, MIE517H1, MIE1128H, MIE1129H, MIE1130H, MIE1132H, MIE1240H, MIE1241H, MIE1715H,
MSE1023H, MSE1028H, MSE1058H.

Contact

All students are asked to register with Climate Positive Energy (CPE) at emphasis@cpe.utoronto.ca, at the beginning of their studies, to receive information about energy-related activities and opportunities on campus. CPE also administers a number of awards and scholarships for which students may be eligible.

 


MSE: Materials Science and Engineering MASc, MEng, PhD Courses

A schedule is available on the MSE website at the beginning of the Fall session, listing the time and room location for each course offered in MSE in both the Fall and Winter sessions.

Not all courses are offered every year. Please consult the department for a listing of courses being offered this year.

All students wishing to undertake graduate research in the Department of Materials Science and Engineering must successfully complete a two-day intensive occupational health and safety training program which will normally take place during the week immediately preceding the commencement of graduate courses. More details concerning this course will be provided by the Coordinator of Graduate Studies once admission to a graduate program has been confirmed.

After the initial safety training, all students are required to pass refresher safety training annually.

Materials Science

Course CodeCourse Title
Graduate Research Seminar MASc
Special Topics in Materials Science I
Special Topics in Materials Science II
Interface and Nanophase Engineering
MSE1025HSpecial Topics in Materials Science III
Analytical Electron Microscopy
Advanced Materials Science
Forensic Engineering
Polymers and Composites Engineering
Directed Readings in Materials Science and Engineering I
Optical and Photonic Materials
Application of Electrochemical Techniques in Materials Science
Process Metallurgy of Iron and Steel
Computational Materials Design
MSE1040HEmerging Applications in Biomaterials
Composite Materials Engineering
Directed Readings in Materials Science and Engineering II
Nanotechnology in Alternate Energy Systems
Engineered Ceramics
Materials Physics
MSE1063HApplication of Artificial Intelligence in Process Metallurgy
MSE1064HExtraction, Production, and Processing of Aluminum
MSE1065HApplication of Artificial Intelligence in Materials Design
MSE1066HPractical Aspects of Electron Microscopy
MSE1067HDamage and Failure of Advanced Engineering Materials
MSE1068HAdditive Manufacturing of Metals, Ceramics, and Composites
Graduate Research Seminar PhD
MEng Project
Managing Business Innovation and Transformational Change
APS1043HWriting Your Own Patent Application
Biological and Bio-inspired Materials
Applied Surface Chemistry